جديد ماكينة صناعة الأسفلت emulFalt Bitumno-emulsionnaya ustanovka

emulFalt Bitumen emulsion plant
6 ton/batch – Electrical Heated
General Specifications:
• Mill Capacity: 6 ton/h (ex. CRS1: %60 bitumen, %40 Water-Acid-Emulsifier mix.)
• 3 ton batch capacity limited Water-Acid-Emulsifier (WAE) mix tank.
• Compact design for easy installation and transportation.
• Bitumen has to be heated in bitumen service tank up to specific temperature for production. Heated bitumen shall be pumped directly to the emulsion mill via pump inside the emulsion plant.
• Water will be pumped into WAE mix tank of emulsion plant and heated up to a specific temperature for emulsion production. Mixed with acid & emulsifier.
• No.1 KROHNE flowmeter shall be installed in the pressure line of WAE mix dosing pump and WAE flow rate shall be adjusted via inverter – speed adjustment of the pump.
• Special HCI acid resistant VARISCO V30 (positive displacement pump) for Water-Acid-Emulsifier (WAE) mix. capacity adjustment via an inverter.
• Helical gear type bitumen pump with electrical heating, capacity adjustment via an inverter.
• Electrical heated WAE tank, pumps, pipings & mill.
• Special drum pump for emulsifier & acid.
• Reliable, problem-free operation with 1st class electrical and electronic components.